Aluminium windows & doors
Custom manufactured by Taylah Made Windows
The Central Coast's leading supplier of
aluminium windows and doors
Manufactured on the Central Coast of NSW to meet your specifications and preferences, Taylah Made Windows guarantees quality workmanship across a broad range of products. Our excellent customer service also means that when you choose Taylah Made Windows, your satisfaction is guaranteed.

Manufactured to meet your specifications and preferences
Products
| • Awnings windows | • Sliding doors | ![]() |
| • Double hung | • Sliding windows | |
| • Hinged doors | • Summit 250 sliding door | |
| • Louvre windows | • Winstrom | |
| • Multi track 200 | • Wintec aluminium energy |
Wintec Aluminium Energy Rated Windows & Doors
With modern design, utilising quality seals & hardware componentry, Wintec window and door products meet the high demands for energy efficiency and weather performance in today's market. Some key features to consider with regard to energy efficiency include:
Economy: One important and very practical reason to select Wintec high performance windows is to reduce the annual cost of heating and cooling your home. This makes good economic sense and also contributes to the national effort to reduce the environmental impact of non-renewable energy use.
Good Sealing of Sash and Frame: Heat leaves or enters a home through gaps and cracks around sashes and frames. WERS-rated windows must satisfy Australian Standard AS 2047-1999 for air infiltration performance. Wintec windows and doors easily exceed the requirements of the Standard and achieve air leakage rates less than 0.5 litres per second per square metre of window area. Various seal types are used to help achieve these better ratings.
Structural and Water Resistance: The hollow aluminium extrusions used in Wintec windows and doors not only aid in their energy efficiency, but they give superior performance in water penetration resistance and structural rigidity. In addition, Wintec windows and doors incorporate a baffle in the drainage system that allows water to flow out but restricts air flowing through the window or door frame. Therefore reducing the energy loss normally encountered through drain holes. The Difference between a window that just meets AS 2047 (5 L/s.m2 air infiltration) and a Wintec window is approximately half a heating star. The effect on cooling performance is much less.
Contact details
Click the following link to contact Taylah Made Windows: Taylah Made Windows contact details.
Further reading
- Selecting and fixing finishes part 2. Learn about selecting window frames and windows.
From the Australian Builders Directory. - Selecting and fixing finishes part 3. Learn about selecting doors.
From the Australian Builders Directory. - Composite windows and doors. Aluminium on the outside, timber on the inside.






